A garage door can be damaged by weather, traffic, and abuse for years, leaving it dented and rotten. Fortunately, you can repair dents from iron doors and wood and repair rotten wood damage on wooden doors to restore your garage door to better conditions. Here are some tips and steps to help you fix some of the common damage to the garage door and the tools you need to get it done.
Repair of wooden door patches
Old wooden garage doors made of fiberboard, wood, or other composite wood materials can change shape and be damaged by water due to years of rain and snow that splashes and hits the surface. The bottom of your garage door is very susceptible to this type of wear, which can cause water damage and wood decay. To replace your wood garage door with a new one, it costs $ 1,200 or more.
Prepare area
The first step to start repairing is to sand and remove paint or varnish from the wood surface to expose the wood composite or solid wood body on the door. Use the hand sander with medium to coarse grained sandpaper to remove the outer surface and peel the paint.Next, you have to remove every piece of wood and composite material that has been weathered and defective. In general, you can identify surface material that is rotten and damaged by weathering, because it will detach from the door and can easily penetrate the surface with a screwdriver tip.
Remove all damage from the door by cutting wood damaged by weather and rot with cutting saws or similar cutting tools. This type of tool can help you cut certain areas of damage to create a smooth edge where you can make repairs. To get rid of rot from wood, you can also use the tip of a screwdriver or chisel to cut the damaged wood and only leave the wood in good condition.
Apply patch repair
After you remove all damage from the door, apply a wooden hardener with a brush. This application on wood will harden wood and bind all wood fibers to help better support the repair compound. If you have a large area to fill and fill, such as the bottom of a garage door, cut a piece of plywood of the same size with damage and repair it with wooden screws or nails.Next, mix a number of fillers that are filled around the repair. Keep in mind that it is best to apply automatic filler fillings to more than one layer so that you can build the door structure correctly. Using a putty knife, press the filling into the gap around the patch of plywood and above its surface to make a flat surface that matches the surface of the garage door. Before applying the next layer of automatic body filling, let the first harden a little, then apply the next layer to the partially repaired surface.
Use a spatula to form the edges and sides of the garage door. Let the filler dry completely, sand down to remove any imperfections, then prepare to coat and paint the door.
Repair of wooden door dents
Instead of replacing a garage door panel that has been dented, you can patch the area with automatic filling. Sand the damage area and apply the car body fill layer prepared to fill the grooves and crevices on the door surface. Flatten the filler with a putty knife and let the body filler automatically dry completely, then sand the surface with the orbital sander.Finally, the paint on the outside of the repair dents with the appropriate paint. If you want to repaint all new garage doors, sand the surface of the garage door and use the primer, then a layer of semi-gloss latex paint. Semi-gloss will help make your garage door easier to maintain and will hide the scratches that occur during its lifetime. Apply paint in several layers to provide a uniform application layer.
Use these tips to help you repair your damaged garage door. You can also contact professional services, such as Plano Overhead Garage Door, to get more information or do work for you.
